The water meter plates had been so corroded that a complete resurfacing was necessary. This entailed the removal and recreation of the wavy damascene design. The original was not a coherent machine made design but a free hand swirl. All of the steel arbors were cleaned and then bluing agent was painted on just as had been done originally. All parts were degreased in an ultrasonic tank and then lightly polished on a soft wire wheel.

Dsc03361.jpg (610528 bytes) Dsc03464.jpg (618368 bytes)

Dsc03467.jpg (588170 bytes) Dsc03479.jpg (573597 bytes)

Dsc03372.jpg (596164 bytes) Dsc03474.jpg (578785 bytes)

Dsc03341.jpg (517126 bytes) Dsc03501.jpg (548423 bytes)

Dsc03377.jpg (576812 bytes) Dsc03422.jpg (534905 bytes)

                                            Dsc03462.jpg (545663 bytes)

NEXT
UP