Back Up Next

Most of the arbors were corroded. These were turned on the lathe using various grades of wet-dry sandpaper and then a final run on the buffer wheel to bring up a high polish.

DSC06346.JPG (512699 bytes)   DSC06344.JPG (551803 bytes)

DSC06351.JPG (594401 bytes)

Various taper pins were missing. New ones were turned to replace them.

DSC06494.JPG (524440 bytes)

The strike barrel, arbor, and click wheel were replacements. The machining marks were left on the barrel, which did not match the original on the time side. These marks were buffed out to make both match.

DSC06347.JPG (575795 bytes)  DSC06348.JPG (527449 bytes)

Back Up Next